Invasive Watch: Mulberry

Something went wrong. Please try again later...
Treeline, telephone pole sunset

While they’re celebrated for the fruit and shade they provide, mulberry trees can grow to threaten biodiversity and electrical transmission reliability. Learn how to control them effectively.

Why Mulberry Trees Are a Problem

As a deciduous species capable of thriving in a variety of well-drained soil types (including sandy, clay and loam), mulberry trees (Morus spp.) can be found in each of the lower 48 states (except Nevada) — especially in mild, subtropical and tropical climates. In addition to being recognized by their unique foliage and wide diameter, mulberry trees often invade forest edges or open areas, leading to the displacement of low-growing native plant communities that can otherwise safeguard the integrity of adjacent utility infrastructure.

What Do Mulberry Trees Look Like?

Three primary variations of mulberry trees can be found throughout the United States: red (Morus rubra), white (Morus alba) and black (Morus nigra). These trees feature short, crooked trunks with ridged bark that is light tan when they are young and turns to golden brown as they mature. While each species can grow anywhere from 20 to 40 feet wide, their heights can help you identify one from the others. Red mulberry is the tallest, growing up to 80 feet tall. Comparatively, white mulberry grows up to 60 feet tall, and black mulberry rarely exceeds 30 feet in height.


Paul Wray, Iowa State University, Bugwood.org

Two of the easiest ways to identify mulberry trees are to examine their fruit and leaves. In the spring, mulberry fruit will appear green, white or pale yellow with clusters of tiny fruits, each of which contain a seed. As the fruit ripens, it will turn pinkish red before turning dark purple or black. When ripe, mulberry fruit will measure approximately 1 inch long and possess a blackberry-like appearance.  

It’s also worth noting that mulberry trees are polymorphic, meaning they can feature up to three different leaf shapes on a single branch. Most leaves are oval- or glove-shaped with up to three lobes. Regardless of shape, all mulberry leaves are glossy and light or dark green with serrated edges. While the leaves of black mulberry are heart-shaped at the base and measure up to 5 inches long, the following characteristics can be used to further distinguish one species of mulberry from the next:

  • Red mulberry: Rough leaves that measure 3” to 9” long and feature pointed lobes
    Chris Evans, University of Illinois, Bugwood.org
  • White mulberry: Smooth leaves that measure 5” to 7” long and feature rounded lobes
    David J. Moorhead, University of Georgia, Bugwood.org
  • Black mulberry: Leaves measure 3” to 5” long and are heart-shaped at the base

How to Control Mulberry Trees Effectively

Seeds within the fruit of these perennial trees are commonly consumed by birds, which facilitate propagation by digesting and randomly depositing the seeds. This makes it difficult to anticipate mulberry development. As these trees can grow up to 2 feet each year, it’s important to control them while they grow — before they create issues for your program, the public, and the land you manage. 

Using selective herbicide applications as part of an Integrated Vegetation Management (IVM) strategy can improve results achieved by mechanical mowing, leading to sustainable control and fewer maintenance requirements. Before spraying, be sure to match your equipment and delivery rate of your spray nozzles with the height and density of the trees you target. 

For example, tall and dense brush commonly require the use of a truck-mounted spray gun with spray tips that deliver up to 2 gallons per minute at 40 to 60 psi. Comparatively, backpack sprayers with spray tips that deliver less than 1 gallon of spray per minute are often appropriate for treating shorter brush with low-to-moderate density.

  • High-volume Foliar Application
    Use Vastlan® herbicide from Corteva Agriscience at a rate of 3 to 9 quarts per 100 gallons of spray mixture. Apply the mixture sufficiently to all leaves, stems and root collars at a volume of 100 to 400 gallons of total spray per acre, depending on the size and density of trees on your treatment site. 

    To minimize spray drift, select a minimum spray pressure that provides adequate coverage without forming a mist. Directed sprays should reach no higher than the tops of targeted trees.
  • Low-volume Foliar Application
    Mix up to 9 quarts of Vastlan herbicide in water and apply 10 to 100 gallons of finished spray. Use a sufficient spray volume to ensure uniform coverage on targeted trees, ensuring all areas are sprayed, including foliage, stems and root collars. For optimum results, add a surfactant to the spray mixture. Tank-mixing up to 9 quarts of Vastlan herbicide with labeled rates of Tordon® 22K herbicide in 10 to 100 gallons of finished spray also can broaden the spectrum of control. Always check product labels to confirm state registrations. 
  • Chemical Side-trimming
    If you wish to only control portions of trees that pose a threat to interfere with overhead powerlines, chemical-side trimming applications are a fantastic option. Direct a spray solution of 2.85 ounces of TerraVue® herbicide per acre to cover only the portions of mulberry trees you wish to control. TerraVue herbicide also can be tank-mixed with other labeled herbicides for chemical limb-trimming applications. To prevent inadvertent control of the entire tree, avoid spraying the mulberry crown.
  • Dormant-season Treatments
    After mulberry leaves have fallen off later in the year, a number of dormant-season applications can be used to control mulberry trees. One option is a low-volume basal bark treatment. To control susceptible woody plants with stems less than 6 inches in basal diameter, mix 20 to 30 gallons of Garlon® 4 Ultra herbicide in enough oil to make 100 gallons of spray mixture. Then, apply the mixture with a backpack or sprayer using low pressure and a solid cone or flat fan nozzle. Be sure to spray the basal parts of each tree trunk to a height of 12 to 15 inches from the ground in a manner that thoroughly wets the stems, including the root collar area, but not to the point of runoff. 

    You also can cut the tree down and apply Garlon 4 Ultra herbicide as a 50% dilution v/v in water by spraying all the exposed cambium layer on the freshly cut surface, or use undiluted Garlon 4 Ultra herbicide immediately after cutting. Applications of undiluted Garlon 4 Ultra herbicide are most effective for hard-to-control species.

To learn more about the benefits dormant-season treatments can provide to your program, electrical transmission reliability and your bottom line, click here. Otherwise, more information regarding best practices for controlling incompatible vegetation throughout utility rights-of-way and adjacent land can be found at Utility.VegetationMgmt.com

Tordon® 22K is a Restricted Use Pesticide. Under normal field conditions, TerraVue® is nonvolatile. TerraVue has no grazing or haying restrictions for any class of livestock, including lactating dairy cows, horses (including lactating mares) and meat animals prior to slaughter. Label precautions apply to forage treated with TerraVue and to manure and urine from animals that have consumed treated forage. TerraVue and Vastlan® are not registered for sale or use in all states. Contact your state pesticide regulatory agency to determine if a product is registered for sale or use in your state. Consult the label for full details. State restrictions on the sale and use of Garlon® 4 Ultra apply. Consult the label before purchase or use for full details. Always read and follow label directions.

 

 

Connect with Vegetation Management:

  Twitter

  LinkedIn

Find Your Local VM Specialist

Vistas®

For over 30 years, Vistas® has covered strategies, trends and stories from across the Vegetation Management industry.

Explore Vistas®

Subscribe to Vistas®